VLAN Egress Port Configuration Window
[url=file:///E:/books/books_vlan/e_vlan_egress_portcfg_at.htm#ri]
[/url]This window displays all the VLANs configured on the device. When a VLAN is selected, the Port Egress Information field displays the ports whose egress lists contain the selected VLAN, and the egress state for each port (No Egress, Tagged, or Untagged). The window also allows you to change the egress state.
Note: On some devices, in order to properly configure the egress state for backplane ports, the Auto VLAN Backplane Configuration option should be set to disabled. This option is available via local management. If the option is set to enabled, the backplane ports cannot be set to No Egress via Element Manager. To access the VLAN Egress Port Configuration window, click on Chassis in the Chassis View menu bar, and select VLAN > VLAN Egress Port Configuration from the menu.
| [size=+1]Click the graphic for more information. |
[size=+1]
Selected VLAN
Displays all the VLANs configured on the device. When a VLAN is selected, the Port Egress Information field displays the ports whose egress lists contain the selected VLAN.
VLAN ID Displays the unique number that identifies the selected VLAN.
VLAN Name Displays the name (up to 32 characters) assigned to the VLAN.
Type Displays the VLAN type: Permanent (the VLAN is active and will remain so after the next reset of the device), Dynamic GVRP (the VLAN is active and will remain so until removed by GVRP), or other (the VLAN is active, but is not Permanent or Dynamic GVRP).
Status Displays the current status of the selected VLAN: Enabled (active), Disabled (not active), or Other (created but turned off or in the process of being created). [size=+1]
Port Egress Information
Displays the ports whose egress lists contain the selected VLAN. Use this field to change how frames belonging to the selected VLAN will be forwarded out the port: No Egress (frames will not be transmitted), Tagged (frames will be transmitted as tagged), or Untagged (frames will be transmitted as untagged). For more information see [url=file:///E:/books/how_to/e_egress_config_ht.html]
How to Configure Port Egress State[/url].
Port Displays the number that identifies the port.
Tagging Displays whether the port is implementing the 802.1Q VLAN functionality of tagging frames and GVRP (GARP VLAN Registration Protocol).
Owner Specifies how the port's egress state was configured: by management, by GVRP (GARP VLAN Registration Protocol), or by Dynamic Egress.
Current Displays the current egress state for the port. The egress state specifies how frames belonging to the selected VLAN are forwarded out the port: No Egress (frames will not be transmitted), Tagged (frames will be transmitted as tagged), or Untagged (frames will be transmitted as untagged).
Static Displays the desired egress state for the port: No Egress (frames will not be transmitted), Tagged (frames will be transmitted as tagged), or Untagged (frames will be transmitted as untagged). Right-mouse click on the port to select the desired egress state from the menu.
Note: On the X-Pedition Router, Access ports cannot be set to tagged, and Trunk ports cannot be set to untagged. Egress state cannot be set by the user on X-Pedition Routers with firmware versions of E8.1.0.0 or earlier.
Note: On some devices, in order to properly configure the egress state for backplane ports, the Auto VLAN Backplane Configuration option should be set to disabled. This option is available via local management. If the option is set to enabled, the backplane ports cannot be set to No Egress via Element Manager.
[size=+1]
Buttons Refresh Click
Refresh to update the information displayed in the window.
Apply Click
Apply to set changes made to the VLAN egress port configuration.
Close Click
Close to close the VLAN Egress Port Configuration window.
Help Click
Help to display detailed information about the current window. [url=file:///E:/books/books_vlan/e_vlan_egress_portcfg_at.htm#top]
[/url]
Related InformationFor information on related tasks:
- [url=file:///E:/books/how_to/e_egress_config_ht.html]How to Configure Port Egress State[/url]
For information on related windows:
- [url=file:///E:/books/books_vlan/e_vlan_config_at.html]VLAN Configuration Window[/url]
- [url=file:///E:/books/books_vlan/e_vlan_portcfg_adv_at.html]VLAN Port Configuration (Advanced) Window[/url]
- [url=file:///E:/books/books_vlan/e_vlan_portcfg_basic_at.html]VLAN Port Configuration (Basic) Window[/url]
[url=file:///E:/books/books_vlan/e_vlan_egress_portcfg_at.htm#top]
[/url]
