vlan 详解释
VLAN Egress Port Configuration Window[url=file:///E:/books/books_vlan/e_vlan_egress_portcfg_at.htm#ri][img=117,24]http://www.enterasys.com/support/manuals/eman3.0/windows/images/rel_info.gif[/img][/url]This window displays all the VLANs configured on the device. When a VLAN is selected, the Port Egress Information field displays the ports whose egress lists contain the selected VLAN, and the egress state for each port (No Egress, Tagged, or Untagged). The window also allows you to change the egress state. [b]Note:[/b] On some devices, in order to properly configure the egress state for backplane ports, the Auto VLAN Backplane Configuration option should be set to disabled. This option is available via local management. If the option is set to enabled, the backplane ports cannot be set to No Egress via Element Manager. To access the VLAN Egress Port Configuration window, click on Chassis in the Chassis View menu bar, and select VLAN > VLAN Egress Port Configuration from the menu. [table=90%][tr][td][b][size=+1]Click the graphic for more information.[/size][/b][/td][/tr][/table][img=464,561]http://www.enterasys.com/support/manuals/eman3.0/windows/images/e_vlan_egress_portcfg.gif[/img] [size=+1][b]Selected VLAN[/b][/size]
Displays all the VLANs configured on the device. When a VLAN is selected, the Port Egress Information field displays the ports whose egress lists contain the selected VLAN. [b]VLAN ID[/b] Displays the unique number that identifies the selected VLAN. [b]VLAN Name[/b] Displays the name (up to 32 characters) assigned to the VLAN. [b]Type[/b] Displays the VLAN type: Permanent (the VLAN is active and will remain so after the next reset of the device), Dynamic GVRP (the VLAN is active and will remain so until removed by GVRP), or other (the VLAN is active, but is not Permanent or Dynamic GVRP). [b]Status[/b] Displays the current status of the selected VLAN: Enabled (active), Disabled (not active), or Other (created but turned off or in the process of being created). [size=+1][b]Port Egress Information[/b][/size]
Displays the ports whose egress lists contain the selected VLAN. Use this field to change how frames belonging to the selected VLAN will be forwarded out the port: No Egress (frames will not be transmitted), Tagged (frames will be transmitted as tagged), or Untagged (frames will be transmitted as untagged). For more information see [url=file:///E:/books/how_to/e_egress_config_ht.html][color=#0000ff]How to Configure Port Egress State[/color][/url]. [b]Port[/b] Displays the number that identifies the port. [b]Tagging[/b] Displays whether the port is implementing the 802.1Q VLAN functionality of tagging frames and GVRP (GARP VLAN Registration Protocol). [b]Owner[/b] Specifies how the port's egress state was configured: by management, by GVRP (GARP VLAN Registration Protocol), or by Dynamic Egress. [b]Current[/b] Displays the current egress state for the port. The egress state specifies how frames belonging to the selected VLAN are forwarded out the port: No Egress (frames will not be transmitted), Tagged (frames will be transmitted as tagged), or Untagged (frames will be transmitted as untagged). [b]Static[/b] Displays the desired egress state for the port: No Egress (frames will not be transmitted), Tagged (frames will be transmitted as tagged), or Untagged (frames will be transmitted as untagged). Right-mouse click on the port to select the desired egress state from the menu. [b]Note:[/b] On the X-Pedition Router, Access ports cannot be set to tagged, and Trunk ports cannot be set to untagged. Egress state cannot be set by the user on X-Pedition Routers with firmware versions of E8.1.0.0 or earlier. [b]Note:[/b] On some devices, in order to properly configure the egress state for backplane ports, the Auto VLAN Backplane Configuration option should be set to disabled. This option is available via local management. If the option is set to enabled, the backplane ports cannot be set to No Egress via Element Manager.
[size=+1][b]Buttons[/b][/size] [b]Refresh[/b] Click [b]Refresh[/b] to update the information displayed in the window. [b]Apply[/b] Click [b]Apply[/b] to set changes made to the VLAN egress port configuration. [b]Close[/b] Click [b]Close[/b] to close the VLAN Egress Port Configuration window. [b]Help[/b] Click [b]Help[/b] to display detailed information about the current window. [url=file:///E:/books/books_vlan/e_vlan_egress_portcfg_at.htm#top][img=11,15]http://www.enterasys.com/support/manuals/eman3.0/windows/images/up.gif[/img][/url]
Related InformationFor information on related tasks: [list][*][url=file:///E:/books/how_to/e_egress_config_ht.html][color=#0000ff]How to Configure Port Egress State[/color][/url][/list]For information on related windows: [list][*][url=file:///E:/books/books_vlan/e_vlan_config_at.html][color=#0000ff]VLAN Configuration Window[/color][/url][*][url=file:///E:/books/books_vlan/e_vlan_portcfg_adv_at.html][color=#0000ff]VLAN Port Configuration (Advanced) Window[/color][/url][*][url=file:///E:/books/books_vlan/e_vlan_portcfg_basic_at.html][color=#0000ff]VLAN Port Configuration (Basic) Window[/color][/url][/list][url=file:///E:/books/books_vlan/e_vlan_egress_portcfg_at.htm#top][img=11,15]http://www.enterasys.com/support/manuals/eman3.0/windows/images/up.gif[/img][/url] 虽然，好像很好，但是能不能给个中文
英文的，实在水平有限阿～～～ 看不懂的好东西~~~ 楼主啊，感觉好乱，从哪看起？不过楼主也辛苦了！ 好东西哦
很想考CISCO
不过好象很难啊
本文来自: 中国网管论坛(bbs.bitsCN.com) 详细出处参考：[url]http://bbs.bitscn.com/54739[/url] E文的，看着怕怕。 唯有进来打一串………… english有待进一步学习啊!
不懂
实在是晕:Q: :Q: :Q: :Q: 回去好好学E文了奥 楼主的东西太高深了，我看了半天愣是看不懂~~ 虽然，好像很好，但是能不能给个中文 呵呵，回味下，当初学思科的时候就vlan这块学到稀里糊涂的页:
[1]